Dell Latitude 7210 2-in-1 Service Manual page 29

Hide thumbs Also See for Latitude 7210 2-in-1:
Table of Contents

Advertisement

Discharge the battery as much as possible before removing it from the system. This can be done by disconnecting
the AC adapter from the system to allow the battery to drain.
Do not crush, drop, mutilate, or penetrate the battery with foreign objects.
Do not expose the battery to high temperatures, or disassemble battery packs and cells.
Do not apply pressure to the surface of the battery.
Do not bend the battery.
Do not use tools of any kind to pry on or against the battery.
Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental puncture or
damage to the battery and other system components.
If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing, bending,
or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical support for
assistance. See www.dell.com/contactdell.
Always purchase genuine batteries from
Removing the battery
Steps
1. Follow the procedure in Before working inside your tablet.
2. Remove the:
a)
SD card
b)
SIM
3. To remove the battery:
a) Peel off the adhesive tape covering the battery connector [1].
b) Disconnect the battery cable from the system board [2]
www.dell.com
or authorized Dell partners and resellers.
Disassembly and reassembly
29

Advertisement

Table of Contents
loading

Table of Contents