Yamaha RIVAGE PM3 CS-R3 Owner's Manual page 19

$
%
^
*
( Layer select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer. Different layers are recalled to the faders depending on the combination of the keys, as
shown in the table below:
(* Please refer to the Note regarding the $ INPUT [1]/[2] keys.)
INPUT [1] /
Key
INPUT [1]+[2]*
[A] Input 1-12 / 145-156*
[B] Input 13-24 / 157-168*
[C] Input 25-36 / 169-180*
[D]
Input 37-48 / 181-192*
[E]
Input 49-60 / 193-204*
[F] Input 61-72 / 205-216*
$ INPUT [1]/[2] keys
&
% [MIX]/[MATRIX] keys
^ [DCA] key
(
& [CUSTOM] key
* Layer displays
INPUT [2] /
INPUT [1]+[2]*
Input 73-84 / 217-228*
Input 85-96 / 229-240*
Input 97-108 / 241-252*
Input 109-120 / 253-264*
Input 121-132 / 265-276*
Input 133-144 / 277-288*
Enable you to select an input layer. Press the INPUT
[1] key to select the INPUT 1-72 layer. Press the
INPUT [2] key to select the INPUT 73-144 layer.
NOTE
Press the INPUT [1] key and INPUT [2] key simultaneously
to select the INPUT 145-288 layer. Press these two keys
simultaneously again to select the INPUT 1-144 layer.
When the INPUT 145-288 layer is selected, these key
indicators light up in a different color than when the INPUT
1-144 layer is selected.
Enable you to select an output layer.
Enables you to select a DCA bank.
Turns Custom mode on or off.
Use the INPUT [1], [2], [MIX], [MATRIX], and
[DCA] keys to select a Custom bank. The bank
numbers (1–5) are labeled adjacent to these keys.
Indicates the name of the layer selected via the Layer
select keys (see ( on page 19).
[MIX] [MATRIX]
MIX 1-12 MATRIX 1-12
MIX 13-24 MATRIX 13-24
MIX 25-36 MATRIX 25-36
MIX 37-48 STEREO
MIX 49-60 CUE/MONITOR
MIX 61-72 —
[DCA]
DCA 1-12
DCA 13-24
—
—
—
—
CS-R3 Owner's Manual 19