Sharing Presentations - Huawei TP3106 Quick Start Manual

HD display. If two presentation sources have been
plugged in, the HD display shows the other available
presentation when you tap
figure shows the HD display area on the touch panel.
If touch-sensitive buttons are available for controlling tabletop
displays, you can tap to view the presentation on the center
HD display.
Switching the Display Control Mode
Tap to switch the display control mode from being
controlled centrally to being controlled separately.
You can drag a site to the HD display area to view it.
If the remote site is tri-display telepresence, slide your
finger left or right on the HD display to view the video on
another display of that site.
4 HUAWEI TP3106&TP3118&TP3118S Telepresence Quick Start
/ . The following
If the three HD displays are controlled centrally, they function
holistically to display a specific site.

Sharing Presentations

Step 1 Use a Video Graphics Array (VGA) cable to connect
the VGA IN interface of a multi-functional socket to the
video output interface of the p resentation source. Then
use an audio cable to connect the AUDIO IN interface of
the multi-functional socket to the audio output interface of
the presentation source.
You cannot share a presentation if the multi-functional socket
and the presentation source are not connected by a VGA.
Step 2 Tap .
Step 3 Tap Share Presentation that corresponds to the
multi-functional socket to which the presentation source is
connected.