Advertisement
For Gasoline GTX and Electric
GTX Models
1. Stop the machine on a level surface, set the parking
brake, shut off the engine, and remove the key.
2. Loosely install the long brush-guard mount bracket to
the traction-unit frame (through the bumper) with 2
hex-head flange bolts (5/16 x 1 inch) and 2 flange nuts
(5/16 inch) as shown in
1. Carriage bolt (5/16 x 7/8 inch)
2. Ball-picker mount
3. Flange nut (5/16 inch)
Figure
2.
3. Loosely install the ball-picker mount to the long
brush-guard mount bracket with 2 carriage bolts (5/16
x 7/8 inch) and 2 flange nuts (5/16 inch) as shown in
Figure
2.
4. Torque all fasteners to 19.8 to 25.4 N∙m (175 to 225
in-lb).
Figure 2
4. Long brush-guard mount bracket
5. Hex-head flange bolt (5/16 x 1 inch)
3
Advertisement
