To Enable Autolog And Options; Enable Relay Function - Digistar GT560 AUTOLOG Operator's Manual

14.0.1 To Enable Autolog
This setting allows preset weight values to be entered with the keypad,
so that GT560 can control other functions based on a target weight.
Turn this setting OFF for normal grain cart mode.

14.0.2 Enable Relay Function

The RELAY function defines what function the GT560 performs when
the preset weight is activated during the unloading process. This can
be held at 12 VDC while the Preset is active (PREACT), or activate 12
VDC once the Preset weight is reached during unloading (PRNOPA).
36
And Options
2
6302
4005
GT560 Operators Manual
(Enable--90019)
1. Enter 6302,
.
2. Press
change ALP setting
other than
3. Press
1. Enter 4005
2. Press
RELAY function.
PRESET:
SETPNT: Select control
for 12V DC alarm.
3. Press
AutoLog
2
then press
again to
.
to store.
to change the
to store.
D4168-EN