Hazards When Using And Handling The Power Tool - Baier Elektrowerkzeuge BDB 819 Translation Of The Original Instruction Manual

EN
Dust mask, half-face filter mask or
face mask respirator
Inhaling fine mineral dust can cause
health damage. We recommend
wearing a face mask respirator with
filter class P2 or P3 (to EN 149:2001).
Wet drilling: Working with wet
diamond core drill bits is a grinding
process, during which extremely fine
dust is produced, which is bound by
the added water. If the used water with
the bound dust is not collected, the
bound dust is re-released after drying.
When drilling materials containing
quartz, the risk of silicosis is very high;
therefore, the machine may therefore
only be used in conjunction with the
BAIER BDB 802 centring guide with
suction holder.
•
Ensure other people keep a safe distance
from your work area. Any person entering
the work area must be wearing personal
protective equipment.
Broken pieces of the workpiece or broken insert
tools can fly off and cause injuries, even outside
the immediate work area.
•
Operate the power tool by holding the
insulated gripping surfaces when carrying
out work during which the cutting tool can
hit concealed electrical cables or the tool's
own power lead.
Contact of a cutting tool with a live cable can
also energise metallic parts of the power tool
and result in an electric shock.
•
Keep the mains power lead away from
rotating insert tools.
If you lose control of the tool, the mains power
lead can be cut or caught and your hand or arm
can be pulled into the rotating insert tool.
•
Never put down the power tool until the
insert tool has come to a complete standstill.
The rotating insert tool can come into contact
with the surface on which the power tool is
placed, which could cause you to lose control of
the power tool.
•
Do not leave the power tool running while
you are carrying it.
Your clothing can get caught by inadvertent
contact with the rotating insert tool and the
insert tool can drill into your body.
•
If the machine is switched on, do not direct
insert tools towards your own or other
people's bodies. Do not touch or take hold
of the tools.
| 34 |
•
Always use the additional handle supplied
with the tool.
Loss of control of the machine can result in
injuries.
•
Do not use this tool for overhead drilling
with water supply.
The ingress of water into the power tool
increases the risk of an electric shock.
2.6.6 Hazards when using and
handling the power tool
•
If the machine is used for hand-held drilling,
always hold both handles firmly when
switching on and while working with the
machine. When switching on and while
working with the machine, expect reaction
torques (e.g. due to sudden jamming or
breakage of the insert tool).
•
If the insert tool becomes blocked, stop
exerting feed and switch off the tool.
Check the reason for the jamming and remove
the cause of jammed insert tools.
•
If you want to restart a diamond drill, which
is in the workpiece, before switching on,
check whether the insert tool rotates freely.
If the insert tool jams, it possibly does not rotate
and this can cause overloading of the tool, or
can cause the diamond drill to detach itself from
the workpiece.
•
Do not use any accessories, which have not
been especially provided and recommended
for this power tool by the manufacturer.
Just because you can attach the accessories
to your power tool is not a guarantee of safe use.
•
The approved speed of the insert tool must
be at least as high as the maximum speed
given on the power tool.
Accessories which rotate faster than approved
can break and fly off the tool.
•
Change insert tools carefully and only use
the mounting tools provided, if they are in
perfect condition. Disconnect the mains
plug before changing the insert tool.
Use of the mounting tool provided prevents
damage to the power tool and insert tool.