Table of Contents
Advertisement
Available languages
Available languages
EN
1
About this Instruction Manual
This instruction manual contains all important
information necessary for safe handling of the wet
diamond drill.
The wet diamond drill is also referred to as the "tool"
or "machine" in this instruction manual.
Figure references
References to figures, which are located at the
beginning of the instruction manual are displayed in
the text with this symbol
reference is to Figure number 1).
1.1
Important information
Read the instruction manual
Before starting any work with or on the tool, this
instruction manual, the safety instructions and
the warnings must be read through carefully and
observed.
Always keep this instruction manual together
with the equipment.
An approved half-mask with filter must
be worn!
1.2
Symbols used in the instruction
manual
DANGER
"DANGER" indicates an imminent hazard, which
will result in immediate death or severe physical
injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
WARNING
"WARNING" indicates an imminent hazard, which
could result in death or severe physical injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
| 30 |
1
(here, for example, the
CAUTION
"CAUTION" indicates an imminent hazard, which
can result in minor or moderate physical injuries.
Î This arrow indicates appropriate measures to
avert the pending hazard.
NOTE
"NOTE" indicates possible property damage, gives
use recommendations and helpful tips.
2
General safety instructions
for power tools
WARNING
Read all safety instructions and precautions
marked with the symbol.
Failure to observe the safety instructions and
precautions can result in electric shock, fire and / or
serious injuries.
Keep all safety instructions and precautions
for future reference.
The term "power tool" used in the safety
instructions refers to mains-operated power tools
(with mains power lead) and battery-operated
power tools (without mains power cable).
2.1
Workplace safety
a) Keep your work area clean and well
illuminated.
Untidiness and unlit work areas can result in
accidents.
b) Never use the power tool in potentially
explosive environments containing
flammable liquids, gases or dusts.
Power tools generate sparks which can ignite
dust or vapours.
c) Keep children and other persons away from
the power tool during use.
A moment's distraction can cause you to lose
control of the machine.
Advertisement
Chapters
Table of Contents
