Catalogue Part names........................1 Product features......................1 Mark illustrations......................1 Safety information......................2 Carrying and installing.....................6 Usage at the first time......................7 Thermostat........................7 General knowledge for usage..................8 Cleaning and maintaining the appliance.................9 Defrosting........................9 Faults and diagnosing....................10 Non-fault instances......................10 Chest Freezer For Commercial Use...
Safety information Part names Warning and Attention The below picture is for your reference. There maybe some differences from your appliance. This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities , or lack of experience and knowledge, unless they have been given supervision concerning use of the appliance by a person responsible for their safety.
Page 3
Safety information Safety information Warning and Attention Warning and Attention When there is some flammable gas (e.g. coal gas, natural gas etc) around the appliance, open the window and let the In the cabinet, do not store flammable, The working voltage should be 220-230V +10% /-15 % gas out firstly.
Safety information Carrying and installing Warning and Attention Do not touch the surface to avoid any scald Remove the door seal to avoid asphyxia if during working or right after plugging out. Check all the positions for the package. children inside the cabinet, when the At this moment, the surface is at a high Carry the appliance carefully and avoid Pack the appliance according to the orignial...
Usage at the first time General knowledge for usage Place the appliance according to the Clean the inner cabinet before using. installing requirements. Open the door for air ventilating. Keep some spaces between stored goods. It do good for cooling air circulating and Seal the food by fresh kept bags or closed heat exchange and a better cooling effect After installing the appliance, wait for 30 minutes at least before switching on the appliance.
Faults and diagnosing Cleaning and maintaining the appliance No cooling Bad cooling effects Regular cleaning and maintaining can prolong the life of the appliance and increase the cooling efficiency. - Check if there is a power cut. - Check if the thermostat is on a suitable Plug out before cleaning or maintaining.
Need help?
Do you have a question about the ST-CF1901 and is the answer not in the manual?
Questions and answers