Download Print this page

Safety Instructions - Bosch ErgoMixx MSM6 Series Instruction Manual

Hand blender accessories
Hide thumbs Also See for ErgoMixx MSM6 Series:

Advertisement

Available languages
  • EN

Available languages

Safety instructions

This accessory is designed for the hand blender MSM6... .
Follow the operating instructions for the hand blender.
The accessories are suitable only for the use described in these
instructions.
W Risk of injury from sharp blades / rotating drive!
The universal cutter must be completely assembled before use!
Never grip the blade in the universal cutter. Take hold of the univer-
sal cutter blade by the plastic handle only. Never clean the blades
with bare hands. Use a brush.
W Risk of scalding!
When processing hot milk, use a tall, narrow receptacle for blend-
ing. Hot milk may splash and scald you.
W Important!
Do not attach or remove accessories until the base unit is at a
standstill. Never use the hand blender / blender foot in the universal
cutter. The universal cutter is not microwave-safe. Never immerse
the attachment of the universal cutter in liquids and do not clean
under flowing water or in the dishwasher. Never immerse the gear
attachment in liquids and do not clean under flowing water or in the
dishwasher. Never insert the whisk into the base unit without the gear
attachment.
Before use, read these instructions
carefully in order to become familiar with
important safety and operating instruc-
tions for this appliance. Please keep the
operating instructions in a safe place. If
passing on the appliance to a third party,
always include the operating instructions.
Universal cutter
(for some models)
X Fig. A
Universal cutter XL
1 Universal cutter
2 Cutter blade
3 Vario holder
4 Vario filter insert
5 Vario blade
6 Attachment
7 Lid
Safety instructions
Universal cutter L
7 Lid
8 Universal cutter
9 Cutter blade
For some models:
10 Ice-crusher-blade
You can crush ice with the ice crusher
blade. Optimum processing quantity:
4-6 ice cubes.
Note: The attachment (6) of the universal
cutter XL is used.
If the universal cutter L is not included,
it can be ordered from customer service
(order no. 657247).
en
3

Advertisement

loading