Advertisement
SCREEN SETUP SCREEN
At the top of the screen is the brightness slider. Sliding the slider to
the left will reduce the brightness and to the right will increase it.
From factory the
brightness is at
100%. Below the
brightness slider are
two buttons the one
on the left with the
key icon which is in
the ON state from the
factory is the button
which lets you select
if the screen should
turn on with the
vehicle key being
turned to the
accessory on position
or it should remain
OFF and turn ON by
touching the screen anywhere for 1.5 seconds. If the button is in the
ON position the screen will turn on with the key.
The button on the right is the sleep timer
ON OFF button. With the sleep timer
turned on the timer can be set with the "+"
and "-" buttons in increments of 15
seconds up to a maximum of 120
seconds. With the sleep timer on the
screen is set to sleep after the set amount
of time elapses after the last touch of the
screen. To wake up the screen the screen
can be touched anywhere. Any SWITCH
that is ON before the screen goes into
sleep mode will remain ON until its turned
OFF or power to the device is switched
OFF. This feature is especially useful to
avoid distraction while driving.
Advertisement
