Preparation; Setting Up The Transmitter - Sony SRS-WS1 Operating Instructions Manual

Preparation

Setting up the transmitter

1
Connect the transmitter to the TV and the power outlet
Connect the transmitter and an adapter using the micro USB cable and plug the AC adapter into
the AC outlet.
If your TV is equipped with a digital optical output terminal, connect the transmitter and the TV
using the digital optical cable.
To the AC outlet
AC adapter
(supplied)
Micro USB cable (supplied)
If your TV is not equipped with a
digital optical terminal
Connect the transmitter and the TV using
the audio cable. See "Connecting the
transmitter using the audio cable" (page 10).
2
Set the TV's digital audio output to PCM (Pulse Control Modulation)
Change the setting to PCM in advance. The digital optical input signals are only compatible with
48 kHz linear PCM. The sound may not output properly if the digital audio output on the TV is set
to any setting other than PCM.
For details, refer to the operating instructions of the TV.
Example: if using a Sony TV (the settings may vary depending on the model)
Set [Settings] – [Display & Sound] – [Audio output] – [Digital audio out] - [PCM] or [Settings] –
[Sound] – [Digital audio out] - [PCM].
4
Transmitter
Digital optical cable (supplied)
TV
Insert the cable till
you hear a click