Attaching The Smartphone - Celestron StarSense EXPLORER LT 114AZ Quick Setup Manual

Attaching the
Smartphone
Your First
Night Out
4 | ENGLISH
1
Remove the large cap covering the mirror on the
front of the StarSense dock.
Congratulations! Your telescope is now set up
and you are ready to explore the cosmos. Take the
telescope outside, insert your 25 mm eyepiece,
remove the lens cap, insert your smartphone into the
holder, and launch the StarSense Explorer app. The
tutorial in the app will walk you through the steps on
finding your first astronomical target.
For more information on this product, please visit the respective product page
on celestron.com
SOLAR WARNING:
Never attempt to view the sun through any telescope without a proper solar filter.
Need assistance?
Contact Celestron Technical Support celestron.com/pages/technical-support
08-19
2
Pull open the spring-loaded slider on the top of the
phone dock and set the phone into the holder so it is
flush with the bottom lip of the phone holder. Slowly
release the slider to secure the phone in place.
www.celestron.com/pages/warranty