Assembly - Techness RUN 800 Owner's Manual

12) If the supply cord is damaged ,it must be replaced by the manufacturer,its service agent or
similarly persons in order to avoid a hazard.

ASSEMBLY

●Before starting with the assembly of this fitness device, carefully read through the set up steps
as of page 7 We also recommend that you view the assembly drawing prior to assembly .
● Remove all packaging material and place the individual parts on a free surface. This will
provide you with an overview and will simplify assembly.
● Please consider that there is always the risk of injury when using tools and carrying out
technical activities. Please proceed with care when assembling the device.
●Make sure you have a hazard-free working environment and do not, for example, leave tools
lying around. Deposit the packaging material in such a way that it does not pose a danger.
Foil/plastic bags are a potential risk of suffocation for children!
●Take your time when viewing the drawings and then assemble the device according to the
series of illustrations.
●The device must be carefully assembled by an adult person. If necessary, request aid from
another technically talented person.