Download Print this page

Technical Specification; Built-In Installation - Fisher & Paykel EB60DSXB1 Installation Instructions Manual

Advertisement

them to state authorised special centres. Disposing of the unused appliance correctly avoids damage to the
environment and a risk to health. For more information on disposing of the unused appliance, contact the local
administration, the waste disposal department or the shop where the appliance was bought.

Technical specification

Voltage: 220-240 V~ 50/60 Hz max. 10A
Pressure: 15 bars
Size LxHxD: 594x460x412 mm

Built-in installation

Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be
installed in a column and the column must be firmly fixed to the wall with commercially available brackets.
• All installation or maintenance operations must be performed with the appliance disconnected
• Kitchen furniture in direct contact with the appliance must be heat resistant (65°C min).
• To guarantee correct ventilation, leave a gap at the bottom of the cabinet (see measurements in
https://producthelp.fisherpaykel.com/nz/Cook/Companion_Products/Built-in_Coffee_Maker/EB60DSXB1/User_Guide_EB60D...
Absorbed power: 1350 W
Water tank capacity: 1.8 litres
Weight: 24 kg
from the mains electricity supply.
figure).
Updated: Sun, 22 Mar 2020 12:25:55 GMT
Powered by
2

Advertisement

loading