Cisco 730 Manual page 6

Bluetooth LED
Bluetooth LED
The Bluetooth LED is located on the back of the left ear cup at the top of the Power/Bluetooth switch and
shows your headset connection status.
Table 1: Bluetooth LED Status
Light Status
Solid blue, then off
Blinks blue
Manage Your Bluetooth Connections in the Cisco Headsets App
You can use the Cisco Headsets mobile app to manage your headset Bluetooth connections. Your headset can
save up to eight Bluetooth devices and maintain an active connection with two at the same time.
Procedure
Step 1
On your mobile device, open the Cisco Headsets app.
Step 2 Tap Connected to at the bottom of the home screen.
Step 3
Select the device you wish to connect or disconnect.
Use the USB Adapter
Your Cisco Headset 730 comes with a USB adapter for use with call devices that don't have a Bluetooth
option. The USB Adapter comes out of the box pre-paired to your headset. The adapter automatically connects
to your headset when it plugs into a powered USB port.
When you connect the USB Adapter, the LED blinks and then turns solid when it connects to your headset.
If your headset is unavailable to connect, the LED shuts off.
When you want to disconnect your headset, simply unplug the adapter from the call device. It takes about 10
minutes for your headset to accept another active Bluetooth connection after you disconnect the USB Adapter.
You can also turn off your headset then on again to pair a new device quickly.
Your Headset
6
System State
Successful Bluetooth connection
Headset in Pairing Mode
Your Headset