Advertisement
Step 5
Using 1/4-20 x 3/4" RD Head Bolt, 1/4-20 Flat Washer, and 1/4-20 Lock Washer, fasten the
subframes rear mount brackets (installed in step 2) to the subframe. Do not fully tighten.
Step 6
Using vehicle factory hardware and fender washer, install middle mount bracket to the
vehicle but do not tighten fully to allow for adjustability.
Step 7
Using 10-32 x 1/2" RD Head Bolt, #10 Flat Washer and #10 Lock Washer install front
subframe mount brackets on both left and right side of the subframe.
4
Advertisement
