Related Manuals for Clarke SL-2C
Summary of Contents for Clarke SL-2C
- Page 1 This product conforms with regulation EN131 COMBINATION LADDER & PLATFORM MODEL NO: SL-2C PART NO: 3500800 USER INSTRUCTIONS GC0119 - ISS-2...
- Page 2 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
- Page 3 SAFETY SYMBOLS (TO BSEN131) Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
- Page 4 LADDER SAFETY • DON’T exceed the maximum load stated in the specification. • DON’T use a ladder if you are not fit enough or suffer from giddiness or are not confident with heights. • DON’T stand on the top three rungs (or those marked accordingly) with the unit extended.
- Page 5 ASSEMBLY The stabiliser bars are supplied not attached and must be fitted before using the ladder in any way. Rest them in the notches in the ends of the ladder sections and bolt it in position using a 10 mm wrench. •...
- Page 6 1. When positioning the ladder/ platform take into account risk of collision with the ladder e.g. from pedestrians, vehicles or doors. Secure adjacent doors (not fire exits) and windows where possible. 2. Identify any electrical risks in the work area, such as overhead cables or other exposed electrical equipment.
- Page 7 SETTING UP AS AN A-FRAME STEP LADDER (3) 1. To create a step ladder engage the two sections at the top and tilt to create the steps. 2. Fit the bracing pieces shown in Fig 5 and ensure the locking clips are connected to the ladder uprights as shown.
Need help?
Do you have a question about the SL-2C and is the answer not in the manual?
Questions and answers