Table of Contents
Advertisement
USE OF THE VOICE
COMMANDS
Please follow the suggestions below to
be sure that the voice commands are
always recognised by the system:
speak at a normal volume;
always wait for the "beep" (warning
sound) before speaking;
the system is capable of recognising
the voice commands given, irrespective
of gender, tone of voice and intonation
of the person giving the instructions;
if possible, try and keep the noise in
the passenger compartment to a
minimum;
before giving voice commands, ask
other passengers not to talk. This is
to prevent misunderstanding since the
system may recognise other words
(in addition to or different from your
voice command) if several people are
speaking;
for optimum operation, it is
advisable to close the windows and the
sun roof (for versions/markets, where
provided) to avoid external interference;
32
to guarantee correct operation of the
voice commands for the connected
mobile phone, make sure that the
phonebook has been completely
downloaded (or updated) by the
Uconnect™ system: usually
5-10 seconds after pairing the phone
with the Uconnect™ system are
enough.
IMPORTANT Voice commands must
always be given in safe driving
conditions, in compliance with the laws
in force in the country where you are
driving and using the mobile phone
correctly.
INFORMATION ON VOICE
COMMANDS
The TomTom navigation system uses
voice commands for some or all of the
following functions:
driving information;
set warnings.
Two types of voices are available during
navigation:
computer voices: they are generated
by the navigation system. They read
responses to voice commands and
traffic;
human voices: which have been
recorded by an actor and provide
instructions about the route only.
VOLUME LEVEL
ADJUSTMENT
The volume of the navigation system
can be adjusted on the main unit.
Proceed as follows to activate/
deactivate the navigation instructions:
in the "Driving view": touch the
central box of the status bar to activate
the navigation instruction audio again
(if previously deactivated);
in the "Setting menu": touch
"Settings" in the Main menu, then touch
"Enable / disable voice guide".
USE OF THE VOICE
COMMANDS
Instead of touching the screen, voice
can be used to give voice commands
to the navigation system.
For example, just say "2D view" to
switch to the 2D view.
To display the list of available
commands, touch "Help" in the Main
menu, then touch "What can I say?".
Advertisement
Table of Contents
