Table of Contents
Advertisement
CONTINUING A PHONE
CALL
After the engine is switched off, it is still
possible to continue a phone call.
The call continues until it is ended
manually or for a maximum period of
about 20 minutes.
When the system is switched off the
call is transferred to the mobile phone.
ACTIVATION/
DEACTIVATION OF THE
MICROPHONE
During a call the microphone can be
deactivated pressing the
button on
the front panel (or on the steering wheel
controls) or the "Mute" button on the
display.
When the microphone is deactivated it
is still possible to listen to the call in
progress.
To reactivate the microphone, press the
corresponding button again.
TRANSFERRING A CALL
The ongoing calls can be transferred
from the mobile phone to the system
and vice versa without ending the calls.
To transfer the call, press the "Transfer"
button.
SMS MESSAGE READER
The system can read the messages
received by the mobile phone.
To use this function the mobile phone
must support the SMS exchange
function through Bluetooth®.
If this function is not supported by the
phone, the corresponding
deactivated (greyed out).
When a text message is received, the
display will show a screen where the
options "Listen", "Call" or "Ignore" can
be selected.
The list of SMS messages received
from the mobile phone can be
accessed by pressing the
SMS message reader activation/
deactivation
The SMS message automatic reading
function can be activated/deactivated
by pressing the corresponding button
on the display, which is shown after
pressing the phone selection button.
On some mobile phones, to make the
SMS voice reading function available,
the SMS notification option on the
phone must be enabled; this option is
usually available on the phone, in the
Bluetooth® connections menu for
a device registered as Uconnect™.
After enabling this function on the
mobile phone, it must be disconnected
and reconnected with the Uconnect™
system in order to make it effective.
IMPORTANT Some mobile phones
may not take the text
message delivery confirmation settings
into account when interfacing with
button is
Uconnect™. If a text message is sent
via the Uconnect™ system, the driver
could face an additional cost, without
any warning, due to the text message
delivery confirmation request sent
by the phone. For any problems related
to the above, contact your telephone
service provider.
button.
SMS MESSAGE OPTIONS
Default SMS messages are stored in
the system memory and can be sent to
answer a received message or as a
new message.
When receiving an SMS, the systems
also allows the same message to
be forwarded.
25
Advertisement
Table of Contents
