Managing An Incoming Call; Making A Second Phone; Call; Managing Two Phone - TomTom Uconnect 5" Radio LIVE Manual

MANAGING AN
INCOMING CALL
Call controls
The buttons on the display allow the
following phone call functions to be
managed:
Answer;
End;
Ignore;
Put on hold/resume;
Deactivate/activate the microphone;
Transfer the call;
Switch from one call to the other;
Conference/merge two active calls.
Answer a call
When a phone call is received on the
mobile phone, the system deactivates
the audio system (if active) and displays
a screen.
Press the "Answer" button or the
button on the steering wheel controls
to answer
Rejecting a call
Press the "Ignore" button or the
button on the steering wheel
controls to reject.
24
Answering an incoming call during
a conversation
To answer an incoming call whilst
another phone conversation is in
progress, press the "Answer" button to
put the ongoing call on hold and
answer the new incoming call.
IMPORTANT Not all mobile phones
may support the management of an
incoming call when another phone
conversation is active.
MAKING A SECOND
PHONE CALL
When a phone conversation is active, a
second phone call can be made as
follows:
select the number/contact from the
list of recent calls;
select the contact from the
phonebook;
press the "Hold" button and dial the
number using the graphic keyboard
of the display.

MANAGING TWO PHONE

CALLS

If two calls are in progress (one active
and one on hold), it is possible to
switch between them by pressing the
"Call On Hold" button or to merge
the two calls into a conference
by pressing the "Merge calls" button.
Check whether the telephone in use
supports the management of a second
call and the "Conference" mode.

ENDING A CALL

Press the "End" button or the
button on the steering wheel
controls to end a call in progress.
Only the ongoing call is ended and any
call on hold becomes the new active

call.

Depending on the type of mobile
phone, if the ongoing call is ended by
the caller, the call on hold may not
be activated automatically.

REDIAL

To call the number/contact of last call
made, press the "Redial" button.