Phone Mode; Phone Mode Activation; Main Functions; Displayed Information - TomTom Uconnect 5" Radio LIVE Manual

WARNING
4) When inserting a device in the AUX
socket, make sure that it does not obstruct
the operation of the handbrake lever.
20

PHONE MODE

PHONE MODE
ACTIVATION
Press the PHONE button (9-fig. 1) on
the front panel to activate Phone mode.
The following screen appears on the
display (see fig. 14 ).
14
NOTE To consult the list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website

MAIN FUNCTIONS

Use the buttons on the display to:
dial the phone number (using the
graphic keypad on the display);
display and call the contacts in the
mobile phone phonebook;
display and call contacts from the
registers of previous calls;
pair up to 10 phones/audio devices
to make access and connection easier
and quicker;
transfer calls from the system to the
mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the vehicle's audio system;
the system automatically mutes the
radio when the Phone function is used.
DISPLAYED
INFORMATION
When a phone is connected to the
system, the display shows various
F0Y1012
information (if available):
status of roaming;
network signal intensity;
mobile phone battery charge;
mobile phone name.
To consult the list of mobile phones and
supported functions, visit the
www.driveuconnect.eu website or call
Customer Service (the number may
vary depending on the country: please
refer to the reference table in the
"Customer Service number list" section
herein).