12. Troubleshooting
①
23
WED
42
31
WED
DEC
13. Charge the Watch
1. Attached the CHARGING PINS at the watch CHARGING PORT which
located at the bottom of the watch. Be sure the pins are aligned.
2. Insert the USB end of the charging cord into a computer USB port or
CE/FCC certified 5V output USB charger.
Battery Specifications: 3.7V / 400mAh
Charging Specifications: 5V / 500mA
Use only USB chargers with 5V output that comply with the CE/FCC standard.
Using non-standard USB chargers will void the warranty.
If any errors or malfunction occur, use factory
③
reset for troubleshooting at [SETTINGS →
Factory Reset]. If that does not work, try
④
hardware reset.
31
DEC
Press ③+④ together, and then press ①.
Release three buttons at same time.
WARNING
16.