Table of Contents
Advertisement
10. Charge the Watch
CHARGING PINS
1. Attach the magnetic charger on the charging contacts located on the side of
the watch. Be sure the pins are aligned. Keep the watch on a stable surface
while charging.
2. Insert the USB end of the charging cord into a computer USB port or CE/FCC
certified 5V output USB charger (exceeding 5V will void the warranty).
AVOID touching the magnetic end of the charging cable with metallic objects
to prevent short circuits and damage to the cable.
For safety reasons, after the watch is fully charged, disconnect the charging
cable from USB power source.
11. Troubleshooting
➀
11
08
Battery/ Charging Information
Battery Specifications: 3.7V / 250mAh
Charging Specifications: 5V / 500mA
CHARGING PORT
CAUTION
➁
If any errors or malfunctions occur, use factory reset
➂
at [SETTINGS → Factory Reset].
If that does not work try a hardware reset by
pressing ②＋③ together, then press ①. Release
all three buttons at the same time.
14.
Advertisement
Table of Contents
