Table of Contents
Advertisement
Instruction Manual
June 2008
STEM
BRACKET SLOTS
FEEDBACK LEVER
ASSEMBLY (KEY
117 OR KEY 170)
49A3788-A
A3231-2 / IL
Figure 4. Typical Mounting Details for 3611JP and 3621JP Positioners on 585 Series Actuators
6. Mark the lever/valve shaft orientation, and
remove the lever.
Cams A, B, and C have the letter D
(direct acting) on one side and the
letter R (reverse acting) on the other
side. Always install the cam with
the letter D on the same side as the
cam mounting screw heads (key 83,
figure 3).
7. Install the desired cam (key 82) on the actuator
lever with the cam mounting screws (key 83). Cams
B and C use the cam adjustment indicator (key 84)
CONTROL VALVE ASSEMBLY WITH ACTUATOR FRONT YOKE COVER PLATE REMOVED
Note
3610J and 3620J Positioners
BUTTON HEAD
SCREW
(KEY 173)
between the screw heads and the cam. Align the
cam adjustment indicator with the desired total valve
rotation indication on the cam. Cam A does not use
the cam adjustment indicator and does not require
adjustment.
8. For actuator styles A and D, proceed to step 11.
For actuator styles B and C, continue with step 9.
9. Slide the lever/cam assembly (cam side first)
onto the valve shaft. Orient the lever with the shaft
as noted in step 6, and tighten the lever clamping
bolt.
Refer to the appropriate actuator
instruction manual to determine the
distance required between the housing
POSITIONER
COVER (KEY 41)
CAPTIVE
COVER SCREWS
3611JP
POSITIONER
POSITIONER
ADAPTER
(KEY 113)
Note
11
Advertisement
Table of Contents
