Siemens TQ5 Series User Manual page 30

en Cleaning and maintenance
Fit the components and insert the
8.
milk container.
19
→ Fig.
If there is a water filter, remove it.
9.
Press ⁠ .
10.
Empty the water tank and fill with
11.
lukewarm water up to the "0.5 l calc"
mark.
Dissolve one Siemens descaling tab-
12.
let in the water tank and press
Place a container with a capacity of
13.
1 l under the outlet system and
press ⁠ .
The descaling programme will run
a
for approx. 20 minutes.
If "Refill descaler." is shown on the
14.
display, add more descaling solution
and press ⁠ .
Rinse the water tank.
15.
Press ⁠ .
16.
If there is a water filter, insert the wa-
17.
ter filter.
→ "Insert water filter", Page 22
Press ⁠ .
18.
Fill the tank with fresh water up to
19.
the "max" mark.
Press ⁠ .
20.
The descaling programme takes ap-
a
prox. 1 minute and rinses the appli-
ance.
Empty and insert the drip tray.
21.
Remove and empty the milk con-
22.
tainer.
Clean the milk container, milk tube
23.
and suction pipe.
Fit the components and insert the
24.
milk container.
19
→ Fig.
The program has ended and the ap-
a
pliance is ready for operation.
Using the cleaning programme
Run the cleaning programme when
your appliance prompts you. The pro-
cess takes approx. 9 minutes.
30
Requirement: The brewing unit is
cleaned.
→ "Cleaning brewing unit", Page 27
Press
1.
Use
2.
and care" and press
Use
3.
and press
To start the programme, press
4.
⁠ .
The display will guide you through
a
the programme.
Empty and insert the drip tray.
5.
Open the ground coffee compart-
6.
ment.
Place one Siemens cleaning tablet
7.
into the ground coffee compartment.
Close the ground coffee compart-
8.
ment and press
Place a container with a capacity of
9.
1 l under the outlet system and
press
The cleaning programme takes ap-
a
prox. 7 minutes.
Empty and insert the drip tray.
10.
The program has ended and the ap-
a
pliance is ready for operation.
Using calc'nClean
You can combine the cleaning and de-
scaling programmes using the
calc'nClean service programme. Run
the calc'nClean programme when your
appliance prompts you. The process
takes approx. 43 minutes.
Requirement: The brewing unit is
cleaned.
→ "Cleaning brewing unit", Page 27
Press
1.
Use
2.
and care" and press
Use
3.
"calc'nClean" and press
To start the programme, press
4.
The display will guide you through
a
the programme.
⁠ .
and to select "Cleaning
⁠ .
and to select "Clean"
⁠ .
⁠ .
⁠ .
⁠ .
and to select "Cleaning
⁠ .
and to select
⁠ .
⁠ .
⁠ .