Asus H310I-IM-A R2.0 Manual page 49

Bootup NumLock State [Enabled]
This item allows you to enable or disable power-on state of the NumLock.
Configuration options: [Disabled] [Enabled]
Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed
when error occurs. Configuration options: [Disabled] [Enabled]
Option ROM Messages [Force BIOS]
[Force BIOS] The third-party ROM messages will be forced to display during the
boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-
party manufacturer had set the add-on device to do so.
Interrupt 19 Capture [Disabled]
This item allows you to trap Interrupt 19 by the option ROMs. Configuration
options: [Disabled] [Enabled]
CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully
support the various VGA, bootable devices and add-on devices for better
compatibility.
Launch CSM [Enabled]
[Auto]
[Enabled]
[Disabled]
The following four items appear when you set Launch CSM to [Enabled].
Boot Device Control [UEFI and Legacy OPROM]
Allows you to select the type of devices that you want to boot up.
Configuration options: [UEFI and Legacy OPROM] [Legacy OPROM only]
[UEFI only]
Boot from Network Devices [Legacy only]
Allows you to select the type of network devices that you want to launch.
Configuration options: [Ignore] [Legacy only] [UEFI driver first]
Boot from Storage Devices [Legacy Only]
Allows you to select the type of storage devices that you want to launch.
Configuration options: [Ignore] [Legacy only] [UEFI driver first]
Chapter 3: BIOS setup
The system automatically detects the bootable devices and
the add-on devices.
For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows® UEFI mode.
Disable the CSM to fully support the Windows
Security Boot.
Security Update and
®
3-19