Pch Configuration; Pch Storage Configuration - Asus H310I-IM-A R2.0 Manual

PEG Port Configuration
Allows you to configure the PEG Port settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIEX16_1 speed. Configuration options: [Auto]
[Gen1] [Gen2] [Gen3]
Memory Configuration
Memory Remap [Enabled]
Allows you to enable or disable remapping the memory above 4GB.
Configuration options: [Disabled] [Enabled]
3.3.4

PCH Configuration

PCI Express Configuration
PCIe Speed [Auto]
Allows you to configure the PCIe speed. Configuration options: [Auto] [Gen1]
[Gen2]
IOAPIC 24-119 Entries [Enabled]
Sets to whether allow IOAPIC 24-119 Entries to expand to PIRQI-PIRQX.
Configuration options: [Disabled] [Enabled]
3.3.5

PCH Storage Configuration

While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Empty if no SATA device is installed to the
corresponding SATA port.
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Configuration options: [Disabled]
[Enabled]
The following items appear only when you set SATA Controller(s) to [Enabled].
Aggressive LPM Support [Disabled]
This item is designed for LPM (link power management) support with a better
energy saving conditions. When disabled, the hot plug function of SATA ports are
disabled. Configuration options: [Disabled] [Enabled]
Smart Self Test [Enabled]
This item allows you to enable or disable the SMART Self Test on all HDDs during
POST. Configuration options: [Disabled] [Enabled]
3-8
H310I-IM-A R2.0