Power Supply - Blodgett MT3870 Specifications

SHORT FORM SPECIFICATIONS
Provide Blodgett Conveyor Oven model MT3870 conveyor oven. Unit shall be gas fired and shall cook by means of forced, heated air (impingement). Unit shall be (single/double/triple)
deck supported by (specify stand type from options list) . Each deck shall be fully independent, of stainless steel construction, and fully insulated on all sides. Provide with electronic
spark ignition gas fired baking compartment with four blowers to evenly distribute heat across baking zone. Conveyor belt shall be 38" (965mm) wide and constructed of stainless steel
wire mesh; baking zone length shall be 70" (1778mm). Unit shall be provided with glass side loading door. Remote control panel shall be solid state with 600°F (315.5°C) maximum
thermostat and digital display of adjustable belt speed. Provide start-up inspection service by a factory authorized service agent. Provide options and accessories as indicated.
DIMENSIONS:
Floor space
Product clearance
Combustible wall clearance 2" (510mm)
Belt width
Standard belt
Optional twin belt
Optional split belt
Baking zone length
GAS SUPPLY:
(specify)
Single
Double stack
Triple stack
MAXIMUM INPUT:
Single 150,000 BTU/hr
Double 300,000 BTU/hr
Triple 450,000 BTU/hr
Minimum Gas Pressure:
Maximum Gas Pressure:
1400 Toastmaster Drive, Elgin, IL USA 60120 • Phone: (847) 741-3300 • Fax: (847) 741-0015
Printed in U.S.A.
MODEL MT3870
62" (1575mm) W x 105.8" (2685mm) L
3" (75mm)
38" (965mm)
19" (482mm)
One 8" (203mm) and one 29" (737mm)
70" (1780mm)
Natural Propane
3/4" NPT 3/4" NPT
1" NPT 1" NPT
1-1/4" NPT 1" NPT
4.5" W.C. for natural gas
11.0" W.C. for propane gas
10.5" W.C. for natural gas
13" W.C. for propane gas
BLODGETT OVEN COMPANY
NOTE: FOR COMMERCIAL USE ONLY

POWER SUPPLY:

Domestic Model:
120/208-240 VAC, 1 Phase, 60 Hz., 9 amp, 3 wire with Ground
Export Model:
220 or 240 VAC, 1 phase, 50 Hz., 9 amp, 2 wire with Ground
MINIMUM ENTRY CLEARANCE:
Uncrated
Crated
SHIPPING INFORMATION:
Approx. Weight: Crated
Single
Double
Triple
Crate sizes:
32" (813mm) x 70" (1778mm) x 105" (2667mm)
NOTE: The company reserves the right to make substitutions
of components without prior notice
www.blodgett.com
APPROVAL/STAMP
24" (610mm)
32" (813mm)
Uncrated
1570 lbs. (711 kg) 1400 lbs. (636 kg)
2970 lbs. (1346 kg) 2800 lbs. (1272 kg)
4390 lbs. (1990 kg) 4200 lbs. (1908 kg)
P/N M9996 Rev H (1/03)