EHEIM compactOUT600 Operating Manual page 17

English
CAUTION! Material damage.
▶ During the installation of the power controller, pay attention to the installation direction. The power controller can only be
installed in the min position.
5. Operation
CAUTION! Material damage.
The pump must not run dry.
Switching the pump on/off
1. Secure the appliance to the ground, below the water level (⌦H). Pay attention to the maximum pond depth (see Tech-
nical data).
2. Insert the mains plug in the mains socket. Attention: The pump starts immediately!
3. To turn it off, remove the mains plug from the mains socket.
Controlling the flow rate
1. Turn the power controller or the suction basket to adjust the water flow rate (⌦E).
6. Maintenance
DANGER! Electrocution!
▶ All appliances must be disconnected from the power supply before any maintenance work is carried out.
CAUTION! Material damage.
▶ Do not use hard objects or aggressive cleaning agents for cleaning.
▶ The appliance components are not dishwasher-proof! Do not clean the appliance or appliance parts in the dishwasher.
The following sections describe maintenance work necessary for optimum and fault-free operation. Regular maintenance
prolongs the service life and assures functionality of the appliance over a long period.
Cleaning the pump
1. Take the pump out of the water.
2. Fold the pump cover up and away from the body of the motor (⌦D).
3. Pull the impeller e out of the motor body (⌦I/J).
4. Clean all components under running water.
5. Install the pump again in reverse order.
17