Programming The Timer; Set Clock; Start Time - Nelson 56612 Instructions Manual

PROGRAMMING THE TIMER

• Rotate the dial to positions indicated for setup.
• Press L/R button to switch between left and right outlet for
all programming
• Left and right outlets can function at the same time
(Water flow will decrease when both sides are used at once.)
NOTE: The dial should be in the RUN position for the Timer
to operate (programmed mode or Manual mode)

SET CLOCK

• Rotate the dial to SET cLock.
• clock display will be in AM or PM.
• Press the + or - button to advance or reverse clock time
(hold button for quick advance).

START TIME

• Rotate the dial to START T IME
• Press L/R to choose Left or Right valve
• Press the + or - button to set the start time
(hold button for quick advance).
HOW LONG
• Rotate the dial to HoW LoNG
• Press the + or - button to set the length of watering time
(1 minute up to 360 minutes)
3