Installation - Nelson 56612 Instructions Manual

to RUN or reduce the delay time to 0.
MANUAL (INSTANT) WATERING
• To water instantly without interrupting the set cycle, press
the button to start watering.
• This mode will function only when the dial is on RUN position
• choose Left or Right valve (Valves can have different
watering duration set)
• Press the + or - button to adjust from 0 to 240 minutes at any time.
• To resume programmed cycle, press the button again
or rotate the knob to oFF and back to RUN.
OFF
• Turning the dial to the oFF position from any other position
will stop the Manual or programmed watering immediately.
RESET
• Pressing the reset button for 2 seconds will erase all the
programs and the T imer will return to factory shipped
condition.

INSTALLATION

• Attach T imer to an outdoor hose faucet and turn faucet on
after programming.
• Not for use on outlet end of 'Y' connectors or other hose
accessories.
5