Note:
UNMS screens shown here are from the iOS-based app. The
Android-based app differs slightly in appearance and operation.
6. Configure these settings:
a. On one AF-5XHD, enable Master Mode; on the other AF-5XHD, keep the
default setting (Off) for Master Mode.
b. Enter a name in the Link Name field. This should be the same on both the
Master and the Slave.
c. Select your Country.
Note:
ensure compliance with FCC regulations.
d. If needed, change the Channel Bandwidth, Frequency, Output Power (EIRP),
Antenna Gain, and Max TX Modulation settings. The Channel Bandwidth and
Frequency should be the same on both the Master and the Slave.
U.S. product versions are locked to the U.S. Country Code to