Ubiquiti airFiber AF-5XHD Manual page 12

4. Enter ubnt in the Username and Password fields. Select your Country and
Language. You must agree to the Terms of Use to use the product. Click Login.
Note: U.S. product versions are locked to the U.S. Country Code to
ensure compliance with FCC regulations.
5. Click the icon.
6. Configure the following settings:
a. For one AF-5XHD, enable Master Mode. For the other AF-5XHD, disable
Master Mode.
b. Enter a name in the Link Name field. This should be the same on both the
Master and the Slave.
c. Select your Country.
Note:
ensure compliance with FCC regulations.
d. If needed, change the Channel Bandwidth, Frequency, Output Power (EIRP),
Antenna Gain, and Max TX Modulation settings. The Channel Bandwidth and
Frequency should be the same on both the Master and the Slave.
e. In the Security Key field, enter a combination of alphanumeric characters (0-
9, A-Z, or a-z).
Note:
characters long.
7. Click Save Changes.
8. Configure each airFiber radio with a unique IP address for the Data port:
a. Click the
b. For both the Data IP Address and Management IP Address options:
DHCP Have your router use DHCP reservation to assign a unique IP
Address.
Static Change the IP Address, Netmask, and other settings to make them
compatible with your network.
c. Click Save Changes.
Repeat the instructions in the airFiber Configuration section on the other AF-5XHD
radio.
For details on the airFiber Configuration Interface, refer to the airFiber AF-5XHD
User Guide, available at:
Upgrade for IP67 Compliance
1.
U.S. product versions are locked to the U.S. Country Code to
The key is an alphanumeric password between 8 and 63
icon.
ui.com/download/airfiber