Caution And Safety - Intelbras GW 108 3G Installation Manual

4. Caution and safety

The following information is addressed to authorized and specialized technicians.
only an authorized technician can open the lid of the product, as well as connect and use
Note:
its interfaces.
» Read all information about the equipment carefully and then follow all safety information.
» Always consult with an immediate superior or responsible person before you start to work, informing
the necessary procedures to perform the requested service and the necessary safety precautions.
» Turn off the system power supply while assembling or removing interfaces.
» Connect the grounding conductor to the system before it starts. Never use the equipment with the
grounding conductor disconnected.
To avoid electrostatic damage to the product, observe the following precautions:
static electricity may damage the interface electronic components. This type of damage may
Note:
be irreversible or reduce the device life expectancy.
» Wear an antistatic wrist strap, or similar, to handle the boards.
» Shipping and storage must only be done in static electricity-proof package.
» After unpacking, place the board on a grounded surface.
» Avoid touching integrated circuit pins or electrical conductors.
» Be always properly grounded when touching the board or any other component.
42