Table of Contents
Advertisement
Available languages
Available languages
5.5. GW 108 3G configuration
To configure the GW 108 3G, the user must download the following software: ITCI Manager and
Web programmer.
Important: the download must be done on the product page, to access it go to the Intelbras web-
site ( www.intelbras.com.br ) and search by product name.
To access the programming of the interface, you must connect it directly to the computer, as follows:
Antena (5-8)
Antena (1-4)
8
7
6
5
4
3
2
1
Ethernet
Reset
AC 90 - 240 50/60Hz
Connection to computer
Detailed information and GW 108 3G procedure of use can be found on the product manual, avai-
lable at www.intelbras.com.br .
Important:
using the Mozilla Firefox
browser (version 40.0).
®
Note:
it is possible to check GSM/3G signal level via configuration web page / web configurator / web interface.
5.6. Reset
To reset the device, press and release the Reset button on the rear panel of the GSM / 3G interface.
48
Advertisement
Table of Contents
