Smooth Surface Mounting - Intelbras GW 108 3G Installation Manual

5.2. Smooth surface mounting

The GW 108 3G interface can also be placed on a smooth surface, such as a table or a shelf.
To install, do the following:
1. Unplug the interface from the power supply;
2. Attach the four rubber feet (they come with the product) to the bottom of the interface, according
to the following picture. The rubber feet are self-adhesive, so remove their protection to enable
them to glue;
Note:
in order to guarantee the correct ventilation and heat dissipation, do not obstruct the sides of the product.
3. Plug the interface power supply into a power outlet;
4. Connect the interface to the network through an Ethernet port;
5. Connect the FXS interface to your PBX analog trunks (FXO);
6. Connect the GSM/3G antennas;
7. Place the SIM Cards into the slots.
46
Rubber feet attachment on the product