Asus ProArt Z490-CREATOR 10G Manual page 26

Hide thumbs Also See for ProArt Z490-CREATOR 10G:
Table of Contents

Advertisement

7.
SATA 6Gb/s ports
The SATA 6Gb/s ports allows you to connect SATA devices such as optical disc
drives and hard disk drives via a SATA cable.
If you installed SATA storage devices, you can create a RAID 0, 1, 5, and 10 configuration
with the Intel
1-12
Rapid Storage Technology through the onboard Intel
®
The slots are set to [AHCI] by default. If you intend to create a SATA RAID set using
these connectors, set the SATA Mode item in the BIOS to [Intel RST Premium with
Intel Optane System Acceleration (RAID)].
When M.2_1 is operating in PCIe mode, SATA6G_2 will be disabled.
M.2_2 shares bandwidth with SATA6G_56. When M.2_2 is in x4 speed and
populated, SATA6G_56 will be disabled. When M.2_2 is in x2 speed and populated,
SATA6G_56 will be enabled.
Before creating a RAID set, refer to the RAID Configuration Guide. You can
download the RAID Configuration Guide from the ASUS website.
Z490 chipset.
®
Chapter 1: Product Introduction

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents