Specifications; Setup - Viking 63299 Owner's Manual & Safety Instructions

Specifications

Setup

read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
controls
LcD Display: Displays charging status, charging
current, voltage, battery type, recondition
mode, winter mode, and error codes.
amperage Button: Use to set the amperage output
from 2 A , 8 A , 15 A and automatic charging rate.
Battery type Button: Use to select the
battery type from standard or AGM. For
GEL batteries use the standard setting.
charge Button: Use to begin charging manually.
recondition Button: Use to activate the
battery reconditioning function for weak,
sulfated, or deeply discharged batteries.
Page 6
Electrical Rating 120 V AC / 60 H z / 3.5 A
Charge Settings* 2 A / 8 A / 15 A
6', 14 AWG
Battery Cables Red = Positive
Black = Negative
Power Cord 6'
*amperage is only present while connected to a battery.
charge Button
For technical questions, please call 1-888-866-5797.
amperage
Button
Battery type
recondition
Button
LcD
Display
Winter Mode Button: Use to activate the
winter charging mode in cold weather.
protection Features:
• Overheating protection – I f the Charger overheats,
it will automatically shut off. Charger will
automatically resume when it has cooled down.
• Reverse polarity – i f the cables are connected
incorrectly, the Charger will not function, and LCD
screen displays reverse polarity error code.
• Overcharging protection – i f the battery
cannot be fully charged within 24 hours,
Charger will stop charging automatically.
Button
Winter Mode
Button
Item 63299