Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19g
Advertisement
Related Manuals for Viking 63350
Summary of Contents for Viking 63350
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Wear ANSI-approved splash-resistant safety goggles. Alternating Current Read the manual before Amperes set-up and/or use. Cold Cranking Amps WARNING marking concerning Risk of Fire. Reserve Capacity Follow connection procedure. Ampere-hours Page 2 For technical questions, please call 1-888-866-5797. Item 63350... - Page 3 6. Do not operate charger with damaged cord or plug current high enough to weld a ring or the – replace the cord or plug immediately. like to metal, causing a severe burn. Item 63350 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 15(e), 15(f), and 16(b) through 16(d). – then connect NEGATIVE (BLACK) charger clip to free end of cable. e. Do not face battery when making final connection. Page 4 For technical questions, please call 1-888-866-5797. Item 63350...
- Page 5 – risk of Fire or Electric Shock. accordance with all local codes and ordinances. Connect battery charger directly to grounding receptacle (three-prong). An adapter should not be used with battery charger. Item 63350 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Specifications
EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. controls Charger Unit Power Cord MODE Button Battery Clamps Battery Terminal Charger Connector Rings Page 6 For technical questions, please call 1-888-866-5797. Item 63350... - Page 7 4. Do not operate Charger in a closed-in battery being charged; gases from battery area or restrict ventilation in any way. will corrode and damage Charger. 5. Do not set a battery on top of Charger. Item 63350 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 POSITIVE (POS, P, +) post of battery. as far away from battery as practical. 7. After use clean, then store the charger indoors out of children’s reach. Page 8 For technical questions, please call 1-888-866-5797. Item 63350...
-
Page 9: Operation
The charger will then automatically enter maintenance mode. Winter Mode (12V STD/AGM) Battery Voltage Battery Charge Level Battery Polarity Clamp Symbol Reversal Symbol Bad Battery Symbol Item 63350 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Maintenance
• damaged electrical wiring or cable insulation, and DO nOt OpEn cHarGEr HOuSinG, • any other condition that may nO uSEr-SErVicEaBLE partS inSiDE. affect its safe operation. Page 10 For technical questions, please call 1-888-866-5797. Item 63350... - Page 11 Serial number Here: note: If product has no serial number, record month and year of purchase instead. Item 63350 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.