Maintenance - Viking 63299 Owner's Manual & Safety Instructions

Maintenance instructions
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO prEVEnt SEriOUS inJUry: Unplug the charger, disconnect any battery, and allow charger
to cool completely before performing any inspection, maintenance, or cleaning procedures.
tO prEVEnt SEriOUS inJUry FrOM tOOL FaiLUrE:
Do not use damaged equipment. if abnormal noise or vibration occurs,
have the problem corrected before further use.
1. BEFOrE EacH USE, inspect the general
condition of the Charger. Check for:
• loose hardware
• cracked or broken parts
• damaged electrical wiring or cable insulation
• any other condition that may
affect its safe operation.
Page 10 For technical questions, please call 1-888-866-5797.
2. aFtEr USE, wipe external surfaces
of the tool with clean cloth.
3. WarninG! if the supply cord of this
charger is damaged, it must be replaced
only by a qualified service technician.
DO nOt OpEn cHarGEr HOUSinG,
nO USEr-SErVicEaBLE partS inSiDE.
Item 63299