SMART EQ forfour Owner's Manual page 100

Using the accessories
98
X
To open: lift up cover :.
X
To close: push down cover :.
X
To remove: pull the ashtray up and out.
X
To insert: insert the ashtray into the cup
holder.
Using the 12 V socket
X
Turn the key to position 1 in the ignition
lock.
X
Lift up the cover of socket :.
X
Connect the device.
The socket can be used for accessories up to a
maximum draw of 120 W (15 A).
If you use the socket for very long periods
when the engine is switched off, the 12 V
battery may discharge.
Fitting and removing the floormats
G
WARNING
Objects in the driver's footwell may
restrict the clearance around the pedals or
block a depressed pedal. This jeopardises
the operating and road safety of the vehi-
cle. There is a risk of an accident.
Stow all objects securely in the vehicle so
that they do not get into the driver's foot-
well. Always fit the floormats securely and
as prescribed in order to ensure that there
is always sufficient room for the pedals. Do
not use loose floormats and do not place
several floormats on top of one another.
X
Slide the driver's seat backwards.
X
To install: press securing knobs : onto
retainers ;.
X
To remove: release securing knobs : from
retainers ;.
Tablet bracket for iPad Air
Useful information
®
iPad Air tablets can be attached to the back
of the front seats using the tablet bracket in
the rear.
The tablet bracket offers the following func-
tions:
The attachment can be rotated 180° allow-
R
®
ing the iPad to be used in portrait or land-
scape mode.
The attachment can be gently tilted allow-
R
ing individual setting.
Please note
G
WARNING
®
The iPad distracts the driver from the
traffic situation. This could cause the
driver to lose control of the vehicle.
®