Phone/ Watch Will Not Charge; Display Modes; Alarm Clock Is Dim - La Crosse Technology C80765 Faqs

Smart Watch Stand
How to attach the Smart Watch Stand
1
How to store the Smart Watch Stand
The Smart Watch Stand can be stored in the integrated storage compartment on the
bottom of the clock when not in use.
1

Phone/ Watch will not Charge

• Be sure your charge cord is attached correctly.
• For Wireless Charging be sure your phone has Qi technology. Place correctly in the
cradle.

Display Modes

• Tap the MODE button to select one Display Mode, or cycle through them all every 5
seconds.
o Choose Time, Date, Indoor Temperature, Indoor Humidity, or Cycle through all
Modes
o When outdoor sensor is added: Choose Display mode should be time, date, In-temp,
In-humid, Out-temp, Out-humid and cycle. Default is time.
• The Color Bar
• The Circling Arrow
• To stop cycling through all modes, Tap the MODE button until the arrow disappears.
Clock will stay on selection.

Alarm Clock is dim

• Tap the SNOOZE/LIGHT button to determine if the LCD backlight is on HIGH or LOW.
• Clock must operate on Power cord for backlight to stay on.
La Crosse Technology, Ltd
2 3
2
above the time will indicate the Display Mode.
indicates the clock will cycle through all display modes.
4
The open design fits
AppleWatch charger
(not included)
3
Page 6