Do I Need To Unplug The Clock To Change The Time; Alarm; Activate/Deactivate Alarm; Snooze Alarm - La Crosse Technology C80765 Faqs

6. Tap SET to confirm and move to the date. DATE will show and Date number 01 will
flash. Tap the + or - button to change the date.
7. Tap SET to confirm and move to the temperature unit. ̊ F will flash. Tap the + or - button
if you prefer °C (Celsius).
8. Tap SET to confirm and move to BEEP ON/OFF. BEEP ON will flash. Tap the + or –
button to turn Beed sound Off.
9. Tap SET to confirm and exit.

Do I need to unplug the clock to change the time?

• No. To access the Program Menu, simply hold the
Greeting will not show. The Greeting will only show when clock is plugged in.

Alarm

1. Hold the ALARM button to enter the Alarm Setting Mode. aL and the Hour will show.
Tap the + or – button to adjust the hour.
2. Tap the ALARM button, aL and the Minutes will show. Tap the + or – button to adjust
the minutes.
3. Tap the ALARM button to select Snooze time (5 minutes to 120 minutes) SNZ will show.
Tap the + or – button to select.
4. Tap the ALARM button to exit.
5. The alarm is active when set.

Activate/Deactivate Alarm

• The alarm is active when set. The Alarm Icon
and disappear when alarm is off.
• Tap the ALARM button once to deactivate. OFF aL will show for 2 seconds
• Tap ALARM button again to activate for the same time. ON aL will show, for 2 seconds
and the alarm time will show for 2 seconds .

Snooze Alarm

• TAP the SNOOZE/BACKLIGHT button to snooze the Sound Alarm for the selected 5-
120 minutes.
• SnZ and minutes countdown will show.
• When Snooze time reaches "00" the alarm will sound. Snooze can be repeated.

Projection

PROJ button
• Tap to change Projection Intensity (OFF - HI - LO)
• Hold to change modes: Toggle between time and outdoor temp and humidity when
sensor is connected
La Crosse Technology, Ltd
SET button for 3 seconds. The
will show on the display when active
Page 4