Scan Trigger; Prefix & Suffix - Newland NLS-NFT10 User Manual

Scan Trigger

Left/Right SCAN key: Use the Scan key on the left/right side of the terminal as scan trigger. Enable or disable them as
per your actual needs.
Prefix & Suffix
To set the prefix/suffix, enter the hexadecimal value of a desired prefix/suffix and then tap "OK". For example, if you want to
add a Line Feed character after each barcode, set the suffix to "0A"; if you want to add a Carriage Return character after
each barcode, set the suffix to "0D".
26