Table of Contents
Advertisement
4. How to insert the two-way mirror
Warning
- handle the two-way mirror with extreme
care. Treat these surfaces like you would a lens.
Handle using the cleaning cloth.
One side of the two-way mirror has a reflective
coating; the other side is non-reflective and faces the
lens, indicated by a label on the glass.
1. Loosen the thumbscrew on the glass retainer
and rotate 90 degrees.
2. Observe the label on the two-way mirror.
Slide the two-way mirror into the main box
using the felt strips as a guide. DO NOT let
any part of the glass come into contact with
the metal surfaces of the main box.
3. Push the mirror all the way to the corners of
the main box, so that glass in seated into the
V-shape of the foam pads.
4. Rotate the glass retainer to back to its
original position and push towards the edge
of the two-way mirror to create a firm hold.
Whilst firmly holding the glass retainer in this
position, re-tighten the thumbscrew.
The two-way mirror can remain fitted in the main
box when packed away for transportation.
To clean, brush or wash loose debris away. Clean
using only the Selvyt cleaning cloth, using non-
greasy window cleaner.
8
Advertisement
Table of Contents
