How To Attach The Main Box To The Camera; How To Attach To 15Mm Rails; How To Attach If The Camera Has No Rails (Such As Dslr) - PrimeLight Design VoxBox Pro Operating Instructions Manual

3. How to attach the main box to the camera

3.1. How to attach to 15mm rails

There are two ways to attach the main box
depending on the camera setup. We strongly
encourage you to mount the unit to your existing
standard 15mm rails as detailed.
NOTE: It is recommended to insert the two-way
mirror after the main box is securely attached to
the camera.
1. Remove your matte box if fitted.
2. Ensure the rails do not extend beyond the
front of the lens. For best results, rail ends
should be in line the front of the lens.
3. Choose a suitable doughnut and fit around
the rim of the lens.
4. Loosen the two levers on the rail block,
slide the main box onto the rails. The front
of the lens should be in line with the hole
in the main box. (The height of the main
box can be adjusted by re-positioning the
rail block to so that the lens is centred in
the hole.)
5. Tighten the two levers on the rail block to
secure the main box.
6. Re-balance tripod head.
6