Table of Contents
Advertisement
5. Positioning the interviewer
5.4 Fourth position for the interviewer
1. Fit the L-bracket so the two way mirror is
positioned as shown in fig 4.
2. Attach the side mirror to the main box using
the thumbscrews. See photo, bottom left.
3. Adjust the side mirror until the interviewer
and subject can see each other. (See next
chapter for details).
4. In some circumstances, the interviewer and
subject may see each other through the small
gap between the side mirror and main box.
This gap can be filled using the magnetic side
flag, if required. See photo, bottom right.
5.5 Lighting the interviewer
In most circumstances, the interviewer will be in
darkness and will need to be lit in order for the
subject to see the face of the interviewer properly.
This can be achieved by using a small camera top
light or similar.
Fig 4
Main Box
Two-way Mirror
Camera
Operator
11
Subject
Side Mirror
Interviewer
Advertisement
Table of Contents
