Table of Contents
Advertisement
5. Positioning the interviewer
5.3. Interviewing while operating the camera
1. Fit the L-bracket so the two-way mirror is
positioned as shown in fig 3.
2. Attach the side mirror to the main box using
the thumbscrews. See photo, bottom left.
3. Adjust the side mirror until the interviewer
and subject can see each other. (See next
chapter for details).
4. In some circumstances, the interviewer and
subject may see each other through the small
gap between the side mirror and main box.
This gap can be filled using the magnetic side
flag, if required. See photo, bottom right.
Fig 3
Side Mirror
Interviewer
10
Subject
Main Box
Two-way Mirror
Advertisement
Table of Contents
