Advertisement
Turn on the Ai1
5
•
Remove the plug from the access port and turn
on the switch (Figure 6). The power LED will flash
to indicate the program is operating. Return the
plug and hand tighten closed. The USB port may
be used to communicate directly with the Ai1,
but that is not required for quick deployment.
Access HydroSphere
6
•
Your system has been added to your
HydroSphere account. Upon turning the system
on, you can log in to HydroSphere to setup data
displays, alarms, and data exports. If you have
not received access you can request it here:
HydroSphere@xyleminc.com.
For additional information please refer to your
HydroSphere Manual.
YSI, a Xylem brand
7100 Business Park Drive, Suite B
Houston, TX 77041
© 2020 Xylem, Inc. XA00101 0620
+1.727.565.2201
info@ysi.com
YSI.com
Figure 6: Remove the plug from the access port and turn on
the switch.
Figure 7: YSI HydroSphere provides secure, real-time monitoring.
YSI.com/DB600
Switch
Advertisement
