Related Manuals for Instanta SureFlow Series
Summary of Contents for Instanta SureFlow Series
- Page 1 SureFlow Wall Mount Series: WMS2, WMS5 & WMS10 (WA2N) (WA5N) (WA10N) Auto-Fill, Wall-mount Catering Water Boilers Installation And User Instructions The Professional’s Choice...
-
Page 2: Table Of Contents
Your new water boiler is designed to give you years of trouble-free service provided that the instructions contained in this manual are followed. All new series Instanta products are energy efficient, simple to operate and easy to service. Find out more about Instanta products at... -
Page 3: Safety Information
Safety Information Environmental Information Please read the following carefully (Information on Disposal for Users of Waste before switching on this appliance. Electrical & Electronic Equipment) A competent installation engineer should install The “crossed out wheelie bin” symbol on this product this appliance in accordance with the installation means that discarded electrical and electronic instructions for this appliance and all relevant local... -
Page 4: Technical Specification
Technical Information Outer casing and tank are constructed in type-304 and type-316 grade stainless steel. The tank is fully insulated with high-temperature polystyrene. The appliance has electronic control of the main functions. This means that the heating, filling and temperature are controlled precisely within given parameters. Model WMS2 (WA2N) WMS5 (WA5N) - Page 5 • Water purification filters are available from Instanta to ensure fresh tasting water. In hard e) FITTING CASE water areas, scale can cause problems. •...
-
Page 6: Operation
Multi-Filters (AQ35), spare parts and accessories are • The boiler will then continue to heat/fill cycle available from Instanta Limited – Tel: 01704 501114 until the tank is at full capacity (during the heat/ and ask for spares fill cycle, small amounts of water are added... -
Page 7: Service/Technical Support/Guarantee
Remove as much loose scale as possible • Problems caused by hard water and lime by hand. scale. We regret we cannot be held responsible for problems caused by hard water Dissolve any scale that is difficult to remove using a suitable de-scaling solution. - Page 8 (the safety device should automatically reset). If the boil-dry cut-out has activated, this will require a manual reset. Contact Instanta Technical Support department for assistance with this. Safety Caution: Isolate boiler from power supply before removing any outer panels or attempting any reset.